08-11-2006 12:10 PM - edited 03-18-2019 06:15 PM
I have a Unity 4.05 on CCM. External calls get fast busy after recording about 30 seconds (trunk dropping?). Unity gets no disconnect and records silence until the timeout.
Internal callers can record up to the 300 sec limit. Would this be strictly a Unity to Gateway connectivity problem?
External callers accessing their mailboxes to play back don't get cut off, only callers recording.
Thanks,
Scott
08-11-2006 04:38 PM
The fact that the call is dropping could be a gateway problem since internal calls work OK. It could also be a TSP problem. The fact that Unity gets no disconnect and records silence is also likely a TSP issue. I ran into Bug CSCsb42730 some time ago which involves Unity and disconnected calls. See the link below.
Bug CSCsb42730
http://www.cisco.com/cgi-bin/Support/Bugtool/onebug.pl?bugid=CSCsb42730
I would recommend upgrading to the latest TSP which is 8.1(3). It can be downloaded from the following link (CCO access required).
http://www.cisco.com/cgi-bin/tablebuild.pl/unity-cm-tsp-8x
Hope this helps. If so, please rate the post.
Brandon
08-12-2006 08:04 AM
Hi Scott,
Have a look at this doc;
http://www.cisco.com/warp/public/788/AVVID/vmdisco30sec.pdf
Also see this thread that deals with a possible licensing issue;
Hope this helps!
Rob
Please remember to rate helpful posts.....
08-14-2006 04:11 AM
Scott, are you still experiencing this problem? Do you have more details on this?
Remember it also says on the release notes, that recording is not possible, although it may appear as recording, when the inbox is full.
Veera
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide