Re:extn mobility phones do not auto logout after fixed time
It is a customer of ours, cm was installed 417 days ago, as it is auto logout it is possible the customer has just noticed this as an issue .. we can log the customers phone out using the logout button on the device page of cm .
I have checked the extn mobility of the servers and it is configured for auto logout after 12 hrs , if you look at the diagram it shows it considered it as logged out after 12hrs but the user is still showing logged in
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...