Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

'Factory Reset' MCS 7835?

Hi everyone,

I need to reset/rebuild a 7835 (CUCM 7.0(2a)).  Its going to be used for a system upgrade and it's been pre configured in error without the .TAR and .XML files being used from the export of the old 4.1.2 system.  Anyone have any ideas - I have searched but cant seem to find anything!!!

Cheers

Mark

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

Re: 'Factory Reset' MCS 7835?

Hi Mark,

We have not done this with CUCM but we have done this with CUC which is the same

platform

Shut down your current build on the 7835;

utils system shutdown

Insert the CUCM 7.0(2) install media and restart the box. It should see the

DVD and start the install over again and offer you the  Windows migration option.

Import Windows Data

This option allows you to import database information from a Cisco Unified Communications Manager 4.x system by using a file that the Data Migration Assistant (DMA) tool produces.

Upgrading the First Cisco Unified Communications Manager Node

When you choose Windows Upgrade, the installation wizard prompts you for the location of the preexisting Windows configuration information that the Data Migration Assistant (DMA) tool created. See the Data Migration Assistant User Guide for more information on the DMA tool.

Step 1 - In the Windows Upgrade window, import data from a Windows version of Cisco Unified Communications Manager by choosing Yes


Hope this helps!

Rob

3 REPLIES
Hall of Fame Super Red

Re: 'Factory Reset' MCS 7835?

Hi Mark,

We have not done this with CUCM but we have done this with CUC which is the same

platform

Shut down your current build on the 7835;

utils system shutdown

Insert the CUCM 7.0(2) install media and restart the box. It should see the

DVD and start the install over again and offer you the  Windows migration option.

Import Windows Data

This option allows you to import database information from a Cisco Unified Communications Manager 4.x system by using a file that the Data Migration Assistant (DMA) tool produces.

Upgrading the First Cisco Unified Communications Manager Node

When you choose Windows Upgrade, the installation wizard prompts you for the location of the preexisting Windows configuration information that the Data Migration Assistant (DMA) tool created. See the Data Migration Assistant User Guide for more information on the DMA tool.

Step 1 - In the Windows Upgrade window, import data from a Windows version of Cisco Unified Communications Manager by choosing Yes


Hope this helps!

Rob

New Member

Re: 'Factory Reset' MCS 7835?

Cheers Guys for your help - I'm reinstalling with the CUCM disks and all going well.

Again, many thanks.

Everyone have a good weekend.

Mark

Re: 'Factory Reset' MCS 7835?

You can't import DMA data after the fact so you're only option is rebuild using DVD media and then import DMA during the new installation.

Hailey

Please rate helpful posts

484
Views
0
Helpful
3
Replies