Fail provisioning Ringlist.xml and List.xml to IP Phones 7975 7945 in CUCM 7.1.5
I have an issue with follow equipments:
1.- CUCM 7.1.5 (Publisher and Suscriber)
2.- 7975 SCCP75.9-3-1SR2-1S
3.- 7965 SSCP45.9-3-1SR2-1S
The deployment of CUCM Publisher and Suscriber were installled succesfully, I used the local TFTPs servers and these are operating properly. I have guaranteed that the Ringlist.xml and List.xml is the folders that CUCM`s used to provisioned the phones.
Initially the Custom Ringlist and List (Wallpapers) resided in the Publisher , when I register an iphone to this server i dont have any problem but when i register the ip iphones to Suscriber arent provisioned with the wallpaper and ringtones. In both cases I restarted the tftps, and applied the option false and then true in the menu Service Parameter Configuration-->IP_Suscriber-->TFTP--> Enabling Caching of constant and bin files at startup.
Only when apply factory reset to the IP Phone, and this is configured to TFTP of Suscriber, download the images and ringtones succesful.
Somebody have a workround that the iphones will obtain its images and ringtones properly without to applied factory reset.
Fail provisioning Ringlist.xml and List.xml to IP Phones 7975 79
I have homologated the directories of Ringlist.xml and List.xml in both Servers CUCM Publisher and Suscriber also i have restarted TFTP servers.
When i register the ip phones to Publisher the IP Phones obtain the files properly, but when i register the same ip phones are not obtained the images and ringtones. Only they obtain the files when i apply factory reset and these are configured to to Suscriber.
I'm not able to access my old voice mail messages all of a sudden. The recording says something like 'the message is currently not available'. This has never happened before in all the years I have been using this system. I have t...
If you have 2 ISR routers, one acting as Failover, do we need to have both the same number of SRST licenses on the 2 routers?
No. You will only need the SRST licenses on the primary router. Because this feature...
You have reached the Cisco Logistics Support Center.. To Check Status of your RMA, visit Product Returns & Replacements (RMA).
Need help? Contact us by Phone or Email.
Phone: 1800 553 2447 Option 4