07-26-2013 06:20 AM - edited 03-19-2019 07:03 AM
Dear Colleagues,
I have to implement some Openstage IP phones (as a 3rd party SIP phone) under our CUCM v9 and I need an advice.
The registration was success, and the call forwarding as well, but I stucked to implement couple calling features. After some research I tought that I should use Feature Access Codes, but what I found it is all about CUCM Express only.
For example this page: http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmefacs.html
Is there any way to use Feature Access Codes on CUCM? And how can I use this possibility?
Kind Reagrds,
Laci
07-26-2013 06:33 AM
No, you're correct, that's CME only.
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk
07-26-2013 06:41 AM
...so, it seems I can implement more features on 3rd party SIP phones under CME than CUCM.
Thank you, Jamie
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide