cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3714
Views
5
Helpful
17
Replies

Final error installation Unified Presence

Oronzo Lezzi
Level 1
Level 1

Hello

we are trying to install Cisco Unified Presence,

but at the end of the installation process we have this error

 

The installation has encountered a unrecoverable internal error....

 

Script "/opt/cisco/install/bin/pmNormalizeGeneric /etc/opt/cisco/install/component_install_cmd_list"

 

exited with error (1).....

 

what could be the reason for this error?

 

Thanks

 

Oronzo Lezzi

17 Replies 17

Jaime Valencia
Cisco Employee
Cisco Employee

What HW and OVA are you using?

HTH

java

if this helps, please rate

Hello Jaime we are trying to re-install using this OVA cucm_im_p_10.0_vmv8_v1.1.ova.

I'm waiting to the end of this installation

 

Thanks

 

Oronzo

Did the ISO pass the media check and/or an MD5 hash verification?

Also, is this running on supported hardware?

http://docwiki.cisco.com/wiki/UC_Virtualization_Supported_Hardware

Hi Jonathan,

we have not yet verified the integrity of the ISO,but last night we tried to re-launch the installation and in the final step we have this error
 

"/usr/local/cm/script/cm-dbms-install install PostInstall 10.0.1.10000-26 /usr/local/cm/ /usr/local/cm/ /common/log/install/capture.txt " failed (1)

It is possible to know what is the purpose of this post-installation script?

 

Thanks

 

Oronzo Lezzi

 

We have verified the ISO and it is OK.

But now we have NTP error on installation

We have used the same NTP server for CUCM and CUPS

admin:utils ntp status
ntpd (pid 19776) is running...

     remote           refid      st t when poll reach   delay   offset  jitter
==============================================================================
 10.0.5.8        .LOCL.           1 u   45   64  377    1.267  -808.02  26.033


unsynchronised
  time server re-starting
   polling server every 64 s

Current time in UTC is : Thu Mar 13 15:07:25 UTC 2014
Current time in Europe/Rome is : Thu Mar 13 16:07:25 CET 2014

 

 

 

 

 

We are correct the NTP server and re-launched the CUP installation.

Sorry for the continous update

 

O.

Hello the installation still fails this error

 

"/usr/local/cm/script/cm-dbms-install install PostInstall 10.0.1.10000-26 /usr/local/cm/ /usr/local/cm/ /common/log/install/capture.txt " failed (1)

 

this is the VM server

 

        2 vCPU: Intel(R) Xeon(R) CPU E5-2643 0 @ 3.30GHz

        Disk 1: 40GB, Partitions aligned

        4096 Mbytes RAM

 

 

this is the hardware of the physical server

 

 

HP ProLiant DL380p Gen8

Intel(R) Xeon(R) CPU E5-2640 0 @ 2.50GHz

SO: VMware ESXi 5.1.0 799733

 

Dell PowerEdge R720

Intel(R) Xeon(R) CPU E5-2643 0 @ 3.30GHz

SO: VMware ESXi 5.1.0 799733

Those VM specs do not match any possible OVA option, use a supported VM.

HTH

java

if this helps, please rate

We have folloed this documentation

 

http://docwiki.cisco.com/wiki/Virtualization_for_Cisco_Unified_Presence

 

 

500 users (Full UC)
See notes
No12 GB1x 80 GB1

You do realize that doc is for CUPS (meaning 8.X version), right?????

And that you previously said you were using OVA for IM&P 10????????

If you really, used the OVA, then that means that you modified it afterwards, which is not supported

And even if you were following the specs from the link you posted... they don´t match any spec!!!!

http://docwiki.cisco.com/wiki/Virtualization_for_Unified_CM_IM_and_Presence

Again, use the OVA for whatever version you´re installing, and don´t change absolutely anything.

HTH

java

if this helps, please rate

a.mehmood
Level 1
Level 1

what did solve this problem foryou, we're havin the same issue right now with 10.5 IM&P

Cisco support install the right image for VM. This solve the issue

 

Regards

 

Oronzo

thx 4 quick response. hope it works for us too. I've already treid 3 different images with the same result.

Hello, I have a similar problem, I'm installing IM&P v10.5.2 on BE6000S, using cucm_im_p_10.5_vmv8_v1.1.ova file selecting option for 1000 users, after more than a hour after initiating installation I got the error and system is halt.

Any idea how to fix this failure??

Regards,

Juan Carlos

 

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: