CUCM6.1 talks to 2 gateways: one for outgoing landline calls, one for outgoing cell phone calls. Incoming calls all use the landline gateway.
My problem is in caller number presentation when incoming calls from landline gateway are forwarded out of cell phone gateway. How can I send the orginal caller ID instead of the forwarding phone id to the cell phone gateway? For example, phone A calls from PSTN into landline gateway, and to a CUCM phone B. Phone B forwards all calls to cellphone C. I want phone A number is presented on phone C as the calling number. The cell phone service provider agrees to present any calling number I send to them.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...