Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Full UC Cisco Jabber

Hello,

I installed CUCM and Cisco Unified Communications Manager IM and Presence 10.x, and Cisco Jabber 9.7.1

When i log in Cisco Jabber i have a few options:

Automatic

Cisco IM & Presence

Webex Messenger

CUCM

 

If i choose Cisco IM & Presence i dont have the options for call the contact and if choose only CUCM i only have chat

 

How can i have both?

Old version i only choose Cisco Unified Presence or Webex.

The CUCM and Cisco Unified Communications Manager IM and Presence are configured.

Can somebody help?

Regards

Leonardo Santana

 

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Choose Cisco IM&P that's it,

Choose Cisco IM&P that's it, if you don't get the option to make calls, there are several causes, all of them configuration

You don't have a CSF device, failed to associate device/line/user, not properly configured the services and service profile, or not assigning it to users, failure of LDAP resolution, user roles, etc.

Follow the J4W config guide by the letter, and it will work.

If you have worked with CUCM and IM&P 9, you should be able to make this work with the same config.

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
2 REPLIES
Cisco Employee

Choose Cisco IM&P that's it,

Choose Cisco IM&P that's it, if you don't get the option to make calls, there are several causes, all of them configuration

You don't have a CSF device, failed to associate device/line/user, not properly configured the services and service profile, or not assigning it to users, failure of LDAP resolution, user roles, etc.

Follow the J4W config guide by the letter, and it will work.

If you have worked with CUCM and IM&P 9, you should be able to make this work with the same config.

HTH

java

if this helps, please rate

www.cisco.com/go/pdi

Thanks Jaime,Im using UDS

Thanks Jaime,

Im using UDS integration.

The CSF devices are associate with the end user. I create the Service Profiles too.

Regards

Leonardo Santana

119
Views
0
Helpful
2
Replies
CreatePlease login to create content