Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

g729 and g711

I have a centralised CCM and Unity set up. CCM is configured to run G729 to remote offices. Unity is version 4.2.1.

Can the Unity system support BOTH codecs at the same time - ie can local users use g711, but remote users use G729? Or if I convert to G729, will everyone use G729?

from the documentation I have read, it looks like I can choose G729, but from then on, everything will be recorded in G729.

thanks.....MS.

1 ACCEPTED SOLUTION

Accepted Solutions
Silver

Re: g729 and g711

Hi, you're going able to use only one codec, you cant't use both at the same time if you're using only one Unity server. There is an interesting white paper at the CCO about the codecs with Unity at:

http://www.cisco.com/en/US/products/sw/voicesw/ps2237/products_white_paper09186a00800875b7.shtml

Regards

Hope this helps, if so pls rate the post.

2 REPLIES
Silver

Re: g729 and g711

Hi, you're going able to use only one codec, you cant't use both at the same time if you're using only one Unity server. There is an interesting white paper at the CCO about the codecs with Unity at:

http://www.cisco.com/en/US/products/sw/voicesw/ps2237/products_white_paper09186a00800875b7.shtml

Regards

Hope this helps, if so pls rate the post.

New Member

Re: g729 and g711

thanks for your help!

117
Views
0
Helpful
2
Replies