Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

ali
New Member

Help with BARS Error - Could not build archive successfully

I have BARS Version 4.0.12 installed on my Cisco Call Manager and the Backup location is a network drive with the right permissions for the user I am logging in as.when I run the Backup utility it gives the following Error:

[08:50:49 PM] Archive file size is less than staging directory. Check if disk space is available on storage location.

[08:50:49 PM] Could not build archive successfully.

I have over 80GB free space on this network drive so that eliminated a space issue

I read somewhere about some 2GB restriction due to the CDR files growing.I don't have this issue since the backup way is less than 1GB

Surprisingly when I set backup to backup to the Subscriber it works fine

Please can anyone help with a sloution to sort this out

Thanks

5 REPLIES
Cisco Employee

Re: Help with BARS Error - Could not build archive successfully

You might be hitting bug CSCee43938.

If there is enough space, and the message is still displayed, it could be

because of the following:

The problem occurs only when a single file has a size more than 2 GB. This

usually is the CDR database.

Purging old CDR records or deselecting CDR database backup during BARS

configuration can avoid this situation.

Also...

The problem arose because the database size has increased more than 2GB and

BARS is unable to create the archive properly when a single file size is more

than 2 GB. Try to delete the records of the database which are not required and

then do a Backup.

OR it can be a problem with NIC card settings on the destination file server.

Event ID: 50

Event Type: Warning

Event Source: Ftdisk

Description: {Lost Delayed-Write Data} The system was attempting to transfer file data

from buffers to \Device\LanmanRedirector. The write operation failed, and only some of the

data may have been written to the file.

http://support.microsoft.com/default.aspx?scid=kb;en-us;816004

Checked the Link Duplex / Speed on the server to which they were backing up to and it was

set to " Auto Detect ". Changed it to Full / 100 and now the backups work fine.

Give those a try.

Tray

ali
New Member

Re: Help with BARS Error - Could not build archive successfully

Hi Thanks for your reply

The total size of the backup is actually less than 1GB as I mentioned in my notes above.

I will check the NIC settings on the backup server to make sure its set to Full duplex and see if that fixes the issue

ali
New Member

Re: Help with BARS Error - Could not build archive successfully

The Backup Server NIC is nailed to 100FD while the CCM is set to Auto.

could this be the issue?

I plan to change the CCM Setting this night.Hope this would not affect anything as this is a live server

Cisco Employee

Re: Help with BARS Error - Could not build archive successfully

It's possible. I saw other cases where this was a factor.

Tray

New Member

Re: Help with BARS Error - Could not build archive successfully

Yeah. I have the same issue for BARS 4.0(11), Just changed CCM server and backup server NICs to 100/Full, backup succeeded.

188
Views
0
Helpful
5
Replies