Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

How do you configure snmp trap destiantions on UCM 6.1

Is there a way to configure the SNMP trap service (if there is one) on UCM 6.1?

Thanks!

Chris

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: How do you configure snmp trap destiantions on UCM 6.1

Yes, under serviceability

Understanding Simple Network Management Protocol

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/service/6_1_1/admin/sasnmdes.html

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
3 REPLIES
Cisco Employee

Re: How do you configure snmp trap destiantions on UCM 6.1

Yes, under serviceability

Understanding Simple Network Management Protocol

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/service/6_1_1/admin/sasnmdes.html

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Re: How do you configure snmp trap destiantions on UCM 6.1

Thanks! Is there a way to test it easily? I have gone through all of the steps but our monitoring system doesn't seem to be getting them.The guy in charge of it says his side is set up correctly.

Cisco Employee

Re: How do you configure snmp trap destiantions on UCM 6.1

The config is really straight-forward, not sure if there might be some service related to this.

I'll check that tomorrow

Have you checked nothing is blocking the SNMP traffic from CUCM?

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
737
Views
0
Helpful
3
Replies