I need to move a single unity 8 server to another rack, so I need to shut it down. It is not part of a cluster.
What do I log into, Cisco unified serviceability? What do I need to stop as far as services and how do I shut down from a web connection? Is there a shutdown on the menu similar to call manager? in call manager it's Call Manager Serviceability Administration and then under settings it is version click on restart.
Re: How do you properly shutdown a unity 8 server?
Thank you for your response.
I did not see the same menu item in unity. Actually our Call Manager is 6.0 so location in GUI is different.
Where specifically in the unity menu would I find that shutdown command? And again just to verify I don't need to stop services. By using the shutdown from the unity menu (not the cli), the server will shutdown properly?
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...