Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

How to Configure Mobile and Remote Access through Expressway with 78/8800 phone

Hello All

    I have configured Expressway servers. Cisco Jabber work well through Expressway.  I also know that 78/8800 phone can work through Expressway, but I can't find any guide of configuration it on 78/8800 phone . 

   Could you provide a detail guide?  thanks in advance !

  • Unified Communications Applications
Everyone's tags (4)
5 REPLIES
Cisco Employee

Hi,

Hi,

Although the same MRA deployment works for both but you can also refer the following link that has details specific to 78XX seris

https://ciscocollab.wordpress.com/2015/05/26/collab-edge-mra-for-78008800dx-series-endpoints/

The latest MRA deployment guide is here

http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/expressway/config_guide/X8-9/Mobile-Remote-Access-via-Expressway-Deployment-Guide-X8-9-1.pdf

Manish

- Do rate helpful posts -

New Member

Hi,

Hi,

   Thanks for your answer !

   I'll research it.

Cisco Employee

Biggest differences are that

Biggest differences are that you need your EXP-E signed by a public CA whose root password is on the devices as you cannot upload new ones, and that if you need to use them with a mixed mode cluster, you need to add the device security profiles to the EXP-C certificate as SAN.

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Hi,

Hi,

    Thanks for you answer!

    I don't understand that add the device security profiles to the EXP-C certificate as SAN. Could you show me more information ?

    Thanks again !

Cisco Employee

The MRA configuration guide

The MRA configuration guide covers that part of the configuration if you're using mixed mode and want encryption end to end.

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
1
Views
0
Helpful
5
Replies
This widget could not be displayed.