Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

How to connect a voice appliance with CUCMBE?

Hi.

I have a voice infrastructure with CUCMBE and C2821 as a voice gateway.

I have a HS Satellite Modem with a voice appliance.

I need to connect the voice appliance to IP telephony network using a call manager extension. i configure this:

1)      Created the extension on the call manager. 3333

2)      Created a dial peer on the C2821 to HS satellite Modem. The same extension 3333.

3)      Create dial peer on the C2821 to call manager. The same extension 3333.

4)      The HN satellite modem connects to C2821 as the voice gateway.

5)      Created a route patter on the call manager to the C2821 as voice gateway for this extension.

The configuration is not function

3 REPLIES
Cisco Employee

Re: How to connect a voice appliance with CUCMBE?

Have you tried setting another DN for the otbound?:

)   Created a dial peer on the C2821 to HS satellite Modem. The extension 4444.

5)  Created a route pattern (4444) on the call manager to the C2821.

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Re: How to connect a voice appliance with CUCMBE?

I made this, but is the same.

Cisco Employee

Re: How to connect a voice appliance with CUCMBE?

You would need to gather a debug voip ccapi inout to understand what/where the call is failing

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
167
Views
0
Helpful
3
Replies