Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

how to convert the wav to G.729

when use cisco ipCC CRA,when we upload new Prompt, the error is The prompt file has an incompatible codec with that installed in the system。

why?how can we change the wav file to support G.729.???????????

4 REPLIES
Silver

Re: how to convert the wav to G.729

Hi,

A bit confused about your post.  You select the codec for the IPCCX system at installation, and you can see which is selected by going to System>System Parameters from the main menu (see below)

Your prompt will need to match that format.  If your IPCCX is running G711 you can easily record your prompt using sound recorder.  If it is running G729 you will need to find a G729 recorder, or if you are lucky you can use Unity (if you are running G729 as your format on it).

HTH,

Art

codec.bmp

Silver

Re: how to convert the wav to G.729

Hi,

A bit confused about your post.  You select the codec for the IPCCX system at installation, and you can see which is selected by going to System>System Parameters from the main menu (see below)

Your prompt will need to match that format.  If your IPCCX is running G711 you can easily record your prompt using sound recorder.  If it is running G729 you will need to find a G729 recorder, or if you are lucky you can use Unity (if you are running G729 as your format on it).

HTH,

Art

codec.bmp

Community Member

Re: how to convert the wav to G.729

thx。because installing select the code is G729,so must use G.729 code wav.but now can't find G.729 recorder.anyone have tools for change the code or convert.thx.

Community Member

Re: how to convert the wav to G.729

use Call manager cisco MOH Audio Translator, can change the PCM to G.729.

thx.

2011
Views
0
Helpful
4
Replies
СоздатьДля создания публикации, пожалуйста в систему