Hello All,
Please I need everyone help on this one. it look simple but I am stock on this one. in a short summary.
I want to load an IOS into the above unit using the boot loader method. it is a new one. this is what I have done ( i have fellow the cisco link but I am unable to establish a connection to my tftp server)
1. Install the nm-cue-ec on the router
2. power on router.
3. assigne ip address to the router int fa0/0 as 10.4.19.142 255.255.255.224
4.assigne ip address to the nm-cue-ec ( int service-engine 0/1 as 192.168.1.2 255.255.255.0 )
5.I have all my ios on my tftp server.
6.session into the service-engine thru int 192.168.1.2
7.I am in the service engine
8.I enter *** to enter boot loader prompt
9. on the boot loader prompt I issue config
10. I input all the parameter
11. when I issue boot help to load ios from tftp server, I am unable to connect to my tftp server
12.I tried pinging my tftp server but I am unable to.
This is where I am stock as I have configure my boot loader as follows.
ip address 10.4.19.146
netmask 255.255.255.224
tftp server 10.4.19.130
gateway 10.4.19.129
the rest parameter as default.
Please any help will be highly appreciated.