I am using a call manager 4.2, and hav a cisco 7960 ip phone. i tried to add the phone using the ccmadmin tool but the phone does not get registered with the call manager it says registeration status unknown. Also on the phone i can see that it tries to default the call manager to the tftp server and the ip address of this is not the ip address of the server that has the call manager software loaded. i think i have to configure the phone to use the call manager servers ip address but i dont know how to do that...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...