I am trying to divert a new hunt group to a voicemail box and am struggling.
My new hunt group contains 3 extensions and I would like the caller to be diverted to the final mailbox in the group if the call is not answered.
The hunt pilot has the "forward hunt no answer" set to point to the last extension in the group. The last extension has a permanent divert to voicemail. However, when I expect the call to divert I simply get the standard Unity message and it doesn't trip to the mailbox.
I have tried alternative ways of doing this such as using the Unity pilot number in the "forward hunt no answer section" and then using this as an alternative extension on the mailbox of the last extension in the hunt group.
Although you haven't specified which Voicemail product you are using (Unity / Unity Connection / Unity Express), this is gnerally default behaviour.
Each of the VM systems defaults to selecting the mailbox based on the original called number, not the final forwarding number. So basically it is trying to match a mailbox based around your hunt group number.
If you are running Unity/Unity Connection then an easy fix is to add the hunt pilot number as an alternate extension to the mailbox.
I have tried that and still no luck although I do understand what your suggesting.
What happens now is that when the caller gets diverted to vmail they hear the standard Unity greeting and not the mailbox greeting of the extensions. I'm starting to think this might be something to do with the calling search space?
I resolved by using the Unity hunt pilot number to divert the calls to. I then created a new voicemail box of the hunt pilot number within Unity using only the last 4 digits of the extension. (Previoulsy I had used the full DDI). This now works perfectly and I have sent up additional MWI's so that all members in the hunt group are notified of a message.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...