I have found in the documentation that the maximum number of Hunt list supported is 15000 per cluster. No info regarding the Line Group limit. However, using the Sizing Tool (11.5(2)), the number of needed cluster increases 3000 on 3000 line groups and nothing happens, regarding the cluster sizing, when Hunt List is configured with more than 15000 devices.
Could you help me to clarify the scalability regarding HL/HP/LG?
I have read SNRD 10.x and Features and Services Guide for Cisco Unified Communications Manager Release 10 from where i have gathered the info I told you in my previous post. But there are no info to shed light on the matter that I have asked:
- Why can you fill the sizing tool with more than 15000 Hunt Lists devices without increasing the number of clusters?
- Why do number of clusters increase each 3000 Line Group devices? The SNRD speaks about calculating Call-per-hour which is related to BW.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...