I just built up two IM& Presence Servers to integrate with the CUCM cluster. It is fail to login with LDAP users through the Presence server, but it can login with Local users through the Presence server and it can login with LDAP users through the CUCM. Any ideas for that?
I discovered the error of the Presence server showed as below: (Is it related?) (I attached the image to this post)
What is the port number that the LDAP authentication uses in call manager. If by any chance this is set to 636 or 3269 ( SSL) ; then you will need to get the SSL certificates installed in the CUPS server as well before the jabber can authenticate.
If the port number is 389 or 3268 and still the jabber refuses to connect with the AD credentials ; can you ensure that you can login to the cupuser page of the presence server with the same credential.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...