Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Incomnig calls go to "Cisco Unity Messaging System...."

One user's Unity voicemail isnot working. Callers get "Hello, Cisco Unity Messaging System, from touchtone...." then "Welcome to Cisco Unity Broadcast Message Administrator, enter your ID followed by pound..."

Delete his Unity account and re-subscirbe didn't fix this problem.

Anyone knows what is going on? Thanks.

Unity V5.0 and CCM V4.2.

3 REPLIES
Silver

Re: Incomnig calls go to "Cisco Unity Messaging System...."

Yes, If you have a broadcast message you have to listen to the whole message.

Randy

New Member

Re: Incomnig calls go to "Cisco Unity Messaging System...."

we didn't setup any broadcase message. where is it from?

Cisco Employee

Re: Incomnig calls go to "Cisco Unity Messaging System...."

there are two options, either someone configured the DN from the subscriber as the broadcast manager and that's why you're reaching that or someone configured a call routing rule for that.

that's not something that just comes with unity so someone must have configured that

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
1463
Views
0
Helpful
3
Replies
CreatePlease login to create content