There has to be some sort of switches you can use for the exe and msi to make it silent. I tried /quiet for the exe and it won't run it unattended. And it appears the msi I can get to run unattended with the /qn however it is trying to hit the msi again once the user is running the app....so I'm gonna try and copy it local first. We'll see what happens then.
****From what the other guy said it doesn't install correct in our environment. The install goes through then when you log in as admin it says that ocs must be closed, then you close it and it says it needs to be running and fails. Haven't looked into it any further yet. Maybe the above will help for you.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...