Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Integrating CME box to CUCMBE Unity Connection 7.X

Everything I have been reading says you cannot integrate a CME box to CUCMBE 7.X to use Connection voicemail for the CME users. I have configured remote CME boxes to Unity (standalone) before but never with CUCMBE.

1.) Is it true? You cannot integrate?

2.) Or is it possible but not supported?

Thanks in advance.

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Integrating CME box to CUCMBE Unity Connection 7.X

The CUC integration in a CUCMBE is locked down so you can only register those VM ports to the on-box CUCM. Several things are not possible in a CUCMBE system, see below.

Also, this would be not supported.

What you would need for support is a standalone CUC.

Note Cisco Unified Communications Manager  Business Edition (CMBE) does not support adding new phone system  integrations.

Cisco Unified Communications Manager Business  Edition (CMBE) does not support deleting a phone system integration.

Note Cisco Unified Communications Manager  Business Edition (CMBE) does not support secondary Cisco Unified CM  servers.

Note Cisco Unified Communications Manager  Business Edition (CMBE) does not support SIP servers.

Note Cisco Unified Communications Manager  Business Edition (CMBE) does not support integrations with PIMG/TIMG  units.

Note Cisco Unified Communications Manager  Business Edition (CMBE) does not support phone system trunks.

http://www.cisco.com/en/US/partner/docs/voice_ip_comm/connection/8x/administration/guide/8xcucsag240.html

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
1 REPLY
Cisco Employee

Re: Integrating CME box to CUCMBE Unity Connection 7.X

The CUC integration in a CUCMBE is locked down so you can only register those VM ports to the on-box CUCM. Several things are not possible in a CUCMBE system, see below.

Also, this would be not supported.

What you would need for support is a standalone CUC.

Note Cisco Unified Communications Manager  Business Edition (CMBE) does not support adding new phone system  integrations.

Cisco Unified Communications Manager Business  Edition (CMBE) does not support deleting a phone system integration.

Note Cisco Unified Communications Manager  Business Edition (CMBE) does not support secondary Cisco Unified CM  servers.

Note Cisco Unified Communications Manager  Business Edition (CMBE) does not support SIP servers.

Note Cisco Unified Communications Manager  Business Edition (CMBE) does not support integrations with PIMG/TIMG  units.

Note Cisco Unified Communications Manager  Business Edition (CMBE) does not support phone system trunks.

http://www.cisco.com/en/US/partner/docs/voice_ip_comm/connection/8x/administration/guide/8xcucsag240.html

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
336
Views
0
Helpful
1
Replies