IP Phone SAP501G in CME

[nils_guerrero]

It is possible to configure an IP pone SAP501G in a CME?

[Rob Huffman · Accepted solution]

Hi Nils,

The SPA500 series of IP Phones are only supported with the UC520

540, 560 Small business systems

https://supportforums.cisco.com/docs/DOC-9551

Attachments:

• Cisco IP Phone Matrix.xls (4.9 MB)

Cheers!

Rob

[nils_guerrero]

thank you very much for your help

[nathaly alarcon · Accepted solution]

The SPA500 series of IP Phones are support in CME using SIP

Example:

voice service voip

ip address trusted list

  ipv4 172.30.0.0 255.255.254.0

allow-connections sip to sip

fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback none

sip     

  registrar server expires max 600 min 60

!

voice class codec 1

codec preference 1 g711ulaw

codec preference 2 g729r8

!

!

voice register global

mode cme

source-address 172.30.0.1 port 5060---------------------------------> IP OF CME

timeouts interdigit 2

max-dn 70

max-pool 70

authenticate register

authenticate realm csb.com

tftp-path flash:

file text

create profile sync 0006058169035549

voice register pool  1

id mac 7081.053E.227C

number 1 dn 1

template 1

dtmf-relay sip-notify

username user1 password cisco

codec g711ulaw

voice service voip

!
!
voice register dn  1
number 505050
!

voice register pool  1
id mac 7081.053E.227C
number 1 dn 1
template 1
dtmf-relay sip-notify
username user1 password cisco
codec g711ulaw

[paolo bevilacqua]

Not really supported, just "can made to work". No features, no localization, no support from cisco.

Use 79xx in SCCP for safe results,, always.

[nathaly alarcon]

Hi Paolo,

Would you mind telling me what features does not works.

I configures 10 phone SPA501G in a CME 9.0 as SIP. I try conference, transference, hold button. I did not try anything else if you have documentation about it ill appreciated if you send it to me..

Thank you...have a good day

[nils_guerrero]

hello nataly,

yesterday I did a lab and the SPA500 can be used under the sip protocol configured with CME. Thank you very much for your help.

Anything more ......

regards