Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Is HP DL320-G6 is working with CCM 4.3?

Dears,

I have 3 Cisco CallManager clusters with 6 MCS-7825-H3 servers, I just want to buy another server as spear part in case any server crash.

But I found in HP only one server DL320-G6 (which is obsolete).

Can anyone confirm is that server will work with CCM 4.3 or not, I didn't find it in data sheet:

http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/vcallcon/ps556/ps7042/product_data_sheet0900aecd805e321f.html

Thanks for advice.

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Is HP DL320-G6 is working with CCM 4.3?

Tamer,

Looks are G5s are the latest CUCM 4.3 supported, G6 will most likely fail hardware compatibility check and not install.

Chris

4 REPLIES
Hall of Fame Super Silver

Is HP DL320-G6 is working with CCM 4.3?

Tamer,

Looks are G5s are the latest CUCM 4.3 supported, G6 will most likely fail hardware compatibility check and not install.

Chris

New Member

Re: Is HP DL320-G6 is working with CCM 4.3?

Thanks Chris, I found that in Cisco documents.

But what do you think if we removed both hard disks from old MCS-7825-H3 server and plug them in DL320-G6...

That can work?

Hall of Fame Super Silver

Is HP DL320-G6 is working with CCM 4.3?

Good question, technically it should, the only issue I see is if you tried to patch it, but since there is not more patches being delivered for Windows based CUCM you should not need to worry about that.

Chris

New Member

Is HP DL320-G6 is working with CCM 4.3?

Actually I should buy this server DL320-G6 for thousands of dollars, so I'm discussing here this point to not go for buying such server and become not supported and I don't use it.

230
Views
0
Helpful
4
Replies