Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Is there any documentation that explains CUCM version nomenclature?

That is what is

the difference between CUCM 6.1.3(b) and CUCM 6.1.3.3000

-1 ?

1 ACCEPTED SOLUTION

Accepted Solutions
Super Bronze

Re: Is there any documentation that explains CUCM version nomenc

Hmm.. not that I've seen.

Basically there is the long form and the short form.

7.1(3) = 7.1.3.10000-11

Usually the 7.1(3) maps to the first three . separated digits, and then the initial version would have a number like 10000 followed by a build number or something... 3a would have 20000, 3b 30000.

7.1(3a) = 7.1.3.20000-2

7.1(3b) = 7.1.3.30000-1

Of course, anything after the 7.1.3 bit in these numbers is liable to pretty random (in initial 'a/b' releases and especially on anything in between such as service updates), so you can look up the version numbers in a couple of places:

- When downloading

- In the upgrade matrix : http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr.html#wp43011

Regards

Aaron

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
5 REPLIES
Cisco Employee

Re: Is there any documentation that explains CUCM version nomenc

They're the same, just naming conventions so you don't need to remember the whole version.

You can go to the download page and you can see this for any version.

Click on 6.1(3b) and you'll get:

UCSInstall_UCOS_6.1.3.3000-1.sgn.iso_part1of2

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
Red

Re: Is there any documentation that explains CUCM version nomenc

Ya, it's a "tradition" in software industry.  6.1.3b is a "marketing name".  6.1.3.3000-1 is the "development version".

For example, Microsoft Exchange version table: http://www.tacktech.com/display.cfm?ttid=41

Michael

http://htluo.blogspot.com

Super Bronze

Re: Is there any documentation that explains CUCM version nomenc

Hmm.. not that I've seen.

Basically there is the long form and the short form.

7.1(3) = 7.1.3.10000-11

Usually the 7.1(3) maps to the first three . separated digits, and then the initial version would have a number like 10000 followed by a build number or something... 3a would have 20000, 3b 30000.

7.1(3a) = 7.1.3.20000-2

7.1(3b) = 7.1.3.30000-1

Of course, anything after the 7.1.3 bit in these numbers is liable to pretty random (in initial 'a/b' releases and especially on anything in between such as service updates), so you can look up the version numbers in a couple of places:

- When downloading

- In the upgrade matrix : http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr.html#wp43011

Regards

Aaron

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
New Member

Re: Is there any documentation that explains CUCM version nomenc

Thanks for the responses... Another dumb question what does the 'SU' stand for in the image name? 

Super Bronze

Re: Is there any documentation that explains CUCM version nomenc

Hi

Service Update

Regards

Aaron

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
566
Views
5
Helpful
5
Replies
CreatePlease login to create content