I have the jabber SDK working well with the sample running from a local machine and hosted on a Windows web server (jabber SDK files installed on local PC still)
What I would like to know what is the best way for the JabberSDK to be accessible from external parties with the ability to make calls, I want to avoid client VPN, open to suggestions SSL tunnel, ASA TLS proxy, etc
User <-> FW/NAT <-> Internet <-> Web Server (with Jabber) <-> CUCM <-> Internal Phone user
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...