last usuage report of Softphone which is in unknown condition
Is there any option to get the last registration time or usuage of the softphones. We have around 185 softphones and is in unknown state.
Due to some license issue, we would like to remove some softphones which is not been used.
We are using CUCM 126.96.36.19900-5 in UCS platform. I tried with RTMT by going to devce search but could not select the status as "Unknown" and am not getting the softphone details when i choose "unregisterd".I tried with CUCM_reporting but no luck.Please help me in this.
Phone status is held inside of the RIS DB (Real Time Information DataBase).
The information in this table has a shelf life of only like 48 or 72 hours. So, if the phone in CUCM shows the ip address, and says unregistered, it was unregistered with the last 72 hours (or so). If it has no IP address and says unknown, then it was atleast 72 hours ago (or so), if not longer, and then there's not way to tell, unless you archive your log files off box and can search through gigbytes and gigbytes of log files.
Alternatively, you can turn to CDR, and ask this question "If a phone hasn't received or placed a call in the last 90 days, can I delete it?"
Please use the star ratings to help drive great content to the top of searches.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...