Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

LDAP authentication server within Unity


I'm having an issue with updating the LDAP server within unity 5.0(1) - basically we're decommisioning our current LDAP server and moving the service and will be load balancing the LDAP servers (front end f5 BIG-IP and back end is pool of LDAP servers) now my issue is that the procedure from the following document is a little alien to me as the server has been up and running since 2007 and we've never needed to touch it after our consultants built and installed basically I don't want to go inputting random strings of data without knowing fully what it will do!

Here is the problem, I've been following this procedure :

I'm basically stumped on the following steps:

7c and 7d - I will not know if I have problems after these as I've never encountered having to swap LDAP authentication servers...

Possibly another question to ask is - is there an easy way to just swap an IP address of the authenticating LDAP over? I've looked but not had much lucky.

Many thanks for your time.