In Cisco Unified Communications Manager v9.x [including Cisco Unity Connection 9.x], you cannot configure more than five LDAP directory configurations. Whilst I know how to add an agreement and use filtering, is there any plans by Cisco to increase this in v10 or above? If you try and change the "Maximum Number Of Agreements" parameter under the "Cisco DirSync" service in "Service Parameters", it currently will not let you do this.
In the collaboration 10 srnd it states: The synchronization is performed by a process called Cisco DirSync, which is enabled through the Serviceability web page. When enabled, it allows one to 20 synchronization agreements to be configured in the system. This number is reduced to 10 if more than 80,000 users are synchronized. An agreement specifies a search base that is a position in the LDAP tree where Unified CM will begin its search for user accounts to import
However when configuring it in cucm it only allows for 5. If I try to change it in the service parameter, it only states that maximum of 5 allowed.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...