I have set up various levels of access to the CUCM GUI but i'm having difficulties in doing the same for the CUPS servers. We use LDAP and use the AD passwords to access the GUI's, If i assign myself to the "Super User" user group in CUCM i have full assess the CUPS GUI as well but i cant give everyone this level of access, I have created a First line User group that only has access to phones, UDP and end users, and this works well for all aspics of CUCM But can't find a role/permission in CUCM to grant them read/write access to the application>CTI gateway>Moc assignment on the Cups server.
Just to let you know this can be done. You need to create a User Group in CUCM and asign the Standard AXL API Access and Standard CCM Admin Users roles to this group. Then asign a user to this group, The user will then be able to log in to the CUPS server with their User ID
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...