Has anyone successfully gotten RCC working between Lync 2013 and UCM(IM&P) 9.1? I have followed the docs but cannot seem to log in. From the traces/captures I have collected it appears CIMP is returning a 401. I ran the RCC troubleshooter on CIMP server and everything comes back green.
I should point out we are using different domains.
example.com is the Lync domain
vc.example.com is the CUPS domain
example.local is our internal (AD) domain
Here is a brief snippet of the log from the CIMP side when Lync client logs on.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...