Are there limits on the number of nodes, script length, etc? I've been told, though web searches and looks through Cisco docs haven't mentioned anything, that there is a limit of one thousand nodes for all scripts combined. If anyone has any insight or pointers to documentantion it will be much appreciated.
Sorry for the very late response. The issue was related to the configuration of MOH wav files which I've corrected. What was happening is that if a caller was listening to music on hold and pressed a key on their phone they'd be disconnected after looping through the MOH nodes a 1000 times; the rtr log errors refered to 1000 nodes being exceeded. Obviously this had nothing to do with some sort of max system limitation on the number of nodes configured in scripting.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...