We just installed meeting place 6 and we are having issues with MeetingPlace web unable to add the DMZ web server to the web site. We kept getting this error -Cannot contact site . Make sure the web server and MeetingPlace Agent on the remote host is running.
Also DST does not work on it. It is one hour ahead on outlook calendar entries.
check that the external is registered on the audioserver and that u have the valid licence for the ext.server on the audioserver. also check ntp connectivity on all mp devices whith same timezone. check that u proper setup the ext.server in the int.server server-settings(host-name,etc).
be shure that the proper ports are opend through the firewall.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...