Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Meeting Place Express : Fast Busy Signal Heard When Using a Cisco IP Phone

As far we know nothing has changed.

Recentl we started having issues with Meeting Place Express : Fast Busy Signal Heard When Using a Cisco IP Phone.

Any Idea? Anyone?

I followed this link, still same issue.

http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace,_Release_6.x_--_Troubleshooting_Cisco_Unified_MeetingPlace_H.323/SIP_IP_Gateway_Software_Release_5.3_With_Release_6.x#Fast_Busy_Signal_Heard_When_Using_a_Cisco_IP_Phone

Fast Busy Signal Heard When Using a Cisco IP Phone

Possible Cause-The route pattern to IP-gateway server may not be configured properly in Cisco Unified Communications Manager.


Corrective Action -To resolve a fast busy-signal problem, verify that the configuration information that you entered in the Assigning a Cisco Unified Communications Manager Route Pattern to Point to the Cisco Unified MeetingPlace H.323/SIP IP Gateway Server page is correct.


To verify the configuration, perform the following steps:

  1. In the Cisco Unified Communications Manager Administration page, choose Route Plan > Route Pattern.
  2. Verify that the settings are correct and make changes if necessary.
  3. When finished, click Insert.


Possible Cause-All IP ports on the Cisco Unified MeetingPlace Audio Server system are in use.


Corrective Action-Confirm that Cisco Unified Communications Manager and the voice gateway have been configured to handle IP call overflow.

1273
Views
0
Helpful
0
Replies
CreatePlease login to create content