Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

MeetingPlace 8.5 failover

I am trying to configure MP 8.5 for failover.  Following the Cisco docs exactly.  When I issue the command to initialize replication from the secondary node 'mp_replication init -n 2 -r <ip address of primary virtual>' I get the 'remote machine <ip address> does not exist'

Thoughts anyone?

1 ACCEPTED SOLUTION

Accepted Solutions
Bronze

MeetingPlace 8.5 failover

Hi,

Check the DNS configuration(most probably name resolution or reverse lookup is not working) and verify by running the nslookup hostname and nslookup ip-address command.

http://www.cisco.com/en/US/docs/voice_ip_comm/meetingplace/8_5/english/administration/failover_application_server_config.html#wp1047009

Regards,

Gnaneswaran.

2 REPLIES
Bronze

MeetingPlace 8.5 failover

Hi,

Check the DNS configuration(most probably name resolution or reverse lookup is not working) and verify by running the nslookup hostname and nslookup ip-address command.

http://www.cisco.com/en/US/docs/voice_ip_comm/meetingplace/8_5/english/administration/failover_application_server_config.html#wp1047009

Regards,

Gnaneswaran.

Community Member

MeetingPlace 8.5 failover

That was it... THANKS!  very fast response and bang on!

543
Views
0
Helpful
2
Replies
CreatePlease to create content