Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

MeetingPlace Express 1.1 on MCS 7825H 3.0

Hi,

We have recently received a copy of MeetingPlace Express 1.1 and I installed it on an MCS 7825H 3.0. The install goes through without a problem and the machine reboots. The problem I am having is that the fans are on high and will not slow down once Red Hat boots up. I upgraded to MeetingPlace 1.2 and this does not help. I am able to put CallManager 4.1 on this same machine and the fans will slow down once the OS starts to boot. Has anyone run into this problem before?

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: MeetingPlace Express 1.1 on MCS 7825H 3.0

I see a reply from HP about a similar issue as follows:

Thank you for contacting HP eServices.This is with reference to your e-mail regarding the fan noise.

The serial number provided (M02DLJHF22), indicates that your server is a MCS-7825H-3.0-ECS1 74-3189-02 US.

To make the fans spin at an optimal rate, we suggest that you install the ProLiant Support Pack. The pack contains the health drivers that will help the fans spin at an optimal rate instead of their maximum speed:

http://h18023.www1.hp.com/support/files/server/us/download/22656.html

We suggest that you update the system ROMPaq firmware from the URL below:

http://h18023.www1.hp.com/support/files/Server/us/download/21989.html

2 REPLIES
New Member

Re: MeetingPlace Express 1.1 on MCS 7825H 3.0

I see a reply from HP about a similar issue as follows:

Thank you for contacting HP eServices.This is with reference to your e-mail regarding the fan noise.

The serial number provided (M02DLJHF22), indicates that your server is a MCS-7825H-3.0-ECS1 74-3189-02 US.

To make the fans spin at an optimal rate, we suggest that you install the ProLiant Support Pack. The pack contains the health drivers that will help the fans spin at an optimal rate instead of their maximum speed:

http://h18023.www1.hp.com/support/files/server/us/download/22656.html

We suggest that you update the system ROMPaq firmware from the URL below:

http://h18023.www1.hp.com/support/files/Server/us/download/21989.html

New Member

Re: MeetingPlace Express 1.1 on MCS 7825H 3.0

I only installed the Support Pack and it worked, the fans are now at normal speed. I will try the firmware upgrade later. Thaks for the help!

109
Views
0
Helpful
2
Replies
CreatePlease login to create content