09-27-2010 07:48 AM - edited 03-19-2019 01:39 AM
Has anyone been able to integrate MPE 2.1.1.2 with CUCM 8?
09-27-2010 09:06 AM
This configuration is untested by Cisco, however, if you configure a regular H323 integration between both systems it should work fine.
Are you facing issues?
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk
09-27-2010 11:24 AM
I am facing issues getting MPE to pull users from CallManager......I thought I had it setup correctly but when I test the connection from MPE it tells me the CallManager is unavailable.
09-27-2010 11:43 AM
So I was able to get the axl stuff to test good, but when I try to login with a user that is on my CUCM it tells me that user does not exist. Also I setup my gateway and route pattern on CUCM and configured the H.323 stuff according to the documentation in the wiki but when I dial the number I assigned I just get a busy signal.
09-27-2010 11:51 AM
After looking at my gateway it does not appear to be registering with the MeetingPlace server.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: