We are having some issues with a meetingplace express system where we get busy signals. In looking at the system, there are plenty of available ports, and the calls get busy signals internally so the we know that it is not a pri issue. I noticed that we are getting some errors in the logs.. anyone know what these mean? We have an H.323 integration with call manager 6.1(2) (same issue with 6.1(1a) previously too.
This error message is due to partinfo call made through nmpagent. The error code means that the participant was not in the conference. Audio and Video calls are not impacted by this. It might be called in a outdial scenario. This does not cause call failures. The "Call Failed" message happens to be what nmpagent logs when the API call filed for participant info.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...