MeetingPlace Express H.323 integration to CUCM and SCCP devices
I have a customer that wants to use the video demo licenses on MPE Version: 126.96.36.199, however, they want to do a scheduled H.323 video conference between 4 SCCP endpoints: 2 7985s and 2 CVTAs. The CUCM is a production system supporting Healthcare and the customer does not want to add the Video MRG because then it would be used by ad hoc SCCP audio as well. The MPE is currently used to support Voice+Web conferences and is defined as a H.323 gateway to the CUCM (v4.2(3)). So far, my scheduled conferences will connect the audio stream, but not the video stream.
Is it possible to define a scheduled H.323 conference and use the SCCP endpoints to connect and see video? Thanks.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...