In MPE, the "From Directory" section lists only those users with MPE profiles. Rather than use the "By email" section, where you can schedule people by entering their email address, you can schedule directly from Outlook. Install the Outlook plugin on the user PC. This plugin adds a new tab to the Calendar Meeting notice. The user opens a new meeting notice in Outlook and then clicks on the MeetingPlace tab. The user is prompted to login and enters userid. From there, all of the MPE schedule options are available. Users in the GAL are added as you would schedule a meeting in Outlook, by using the Scheduling tab and click on Add Others. Hope this helps, Ginger
The Outlook plugin, which has a link to the PC download from the MPE Attend page, has some requirements typical of Outlook plugins:
- You need local administrative rights on the PC
- Outlook must be down during install, or at least closed/restarted following the install
- Any ActiveSync devices must be removed as these keep a portion of Outlook in memory; same for the Microsoft Office Communicator client.
- Another thing to check if the MeetingPlace tab is not showing when you open a new meeting notice in Outlook, go to Outlook - Tools - select Options, select the Other tab - select Advanced Options - select the Add-In Manager tab. Make sure the MeetingPlace for Outlook add-in is checked (enabled).
so i then enter outlook and enter the Add-in Manager tab and there is no MeetingPlace for outlook add-in in the list ? nor when i try add one is there anything that would indicate anything that looks like a meetingplace add in.
my licences look like this..
voiceconf 20 20 Max that can be enabled on this system: 40
webconf 20 20 Max that can be enabled on this system: 40
videoconf 6 6 Max that can be enabled on this system: 40
systemsoftware 1 1 Valid for version 2.0
languages No No
stdvoiceconf 6 0
stdvideoconf 6 0
is there anything else to try ? I have managed to run meetings before and successfully sned the invitation template internally and externally by manually typing the email within meetingplace (schedule) or by adding a pre-setup user which has email credentials.
it is a new system and hardly used at the moment I would be able to reboot with no problems but is this normal in order for changes to take effect ?
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...