I created a new unity box bought 72 port lic's for it and enabled pooling so that I could share subscriber lic's. This all worked out fine.
What I didn't notice is the message recording full length and languages. I will need messages to be longer than the 30 seconds that it is at now. Can someone give me some insight of how to order part # ect. Also what is the approximate cost with this LIC.
The 30 seconds sounds suspiciously like the default setting for a demo license ... not that I am saying that is what has happened. Would you post your license view from the Unity server here? You should also have multiple license files in your c:\commserver\licenses folder (default path) in addition to the demo one CiscoUnity40.lic., each one matching to your server's MAC address.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...