Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

MGCP incoming call number manipulation

Hi All,

Does anybody know how to do MGCP incoming call number manipulation? for example, the incoming call number is 8971001, I need the call routed to extention 1001.

Because MGCP don't have the option to select the significant digit (e.g. 4 digits) in callmanager, how can I do this?

Thank you!

Best Regards,

Teru Lei

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: MGCP incoming call number manipulation

Hi.

You can configure Translation pattern. If you use Calling search space in mgcp-gateway configuration, then this translation pattern must be in partition, that is accessible to this gateway.

In translation pattern configuration page enter:

Translation Pattern - 897XXXX

Called Party Transform Mask - XXXX

3 REPLIES
New Member

Re: MGCP incoming call number manipulation

Hi.

You can configure Translation pattern. If you use Calling search space in mgcp-gateway configuration, then this translation pattern must be in partition, that is accessible to this gateway.

In translation pattern configuration page enter:

Translation Pattern - 897XXXX

Called Party Transform Mask - XXXX

New Member

Re: MGCP incoming call number manipulation

Thanks nomiel. But besides that, no other ways for MGCP? because for H323 gateway and trunk, there is incoming and outgoing digital manipulation, but just for MGCP, I can not find...

New Member

Re: MGCP incoming call number manipulation

As I know, there is only way to manipulate digits with mgcp is to use translation patterns. It's not so difficult and you can change manipulation rules without gateway reset.

168
Views
0
Helpful
3
Replies
CreatePlease to create content