We have two Unity 5.0 servers. One for Domino and one for Exchange (2007). We will soon be ridding ourselves of Domino. When that happens we will want to migrate users from the Unity for Domino server to the Unity for Exchange server. Both Unity servers are in the same VLAN & Subnet and they are both on the same domain.
Is there a way to migrate user accounts from Unity for Domino to Unity for Exchange?
"Export works with Unity 4.0(5), 4.1(x), 4.2(x), 5.0(x), and 7.0(x) with Exchange Unity Connection 1.2(x). No support for Domino based Unity installations is planned."
But it also says:
"NOTE: Exports of Unity systems with Domino as the back end do not support extracting public distribution list membership details. All other data can be extracted, however, including messages. No imports onto Domino based Unity systems are supported and there are no plans to support this moving forward."
Can anyone clarify? I am wondering if what this means is that exporting data from Unity for Domino and importing that data to Unity for Exchange should work, but TAC won't support me.
No, there is no IMPORT into Domino... COBRAS does support EXPORTing from Domino based systems - no, these are no the same thing and are not equivalient from a rights and access perspective by a long shot unfortunately.
There's no plans to support IMPORTing into Domino based Unity systems - COBRAS primary objective (the reason why I was asked to take the project on in the first place) was to get folks from Unity/Connection 1.x based systems to Linux based Connection systems. The Unity to Unity options were an added bonus we put in there primarily for testing exposure for the Export more than anything else. The level of effort for dev, testing and maintenance for Domino based imports was considered too high to pursue.
My client wants to do a COBRAS export from a Unity Domino/UM system to Unity Connection 8.5. There would be no import of messages into Unity at all. I want to export Unity UM/Domino system with messages, into a new UCxn 8.5 install.
That should work - COBRAS uses the DOH/MAL interface to extract messaes in that case so you'll need to be logged in as the account associated with AvCsMgr to have rights to do that (noted in the help file and you'll get barked at before the export starts if not).
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...