Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Users might experience few discrepancies in Search results. We are working on this on our side. We apologize for the inconvenience it may have caused.
New Member

Migration from Cisco unity to Mitel

Hi All,

i am very new to voice and we are migrating from cisco ip phoen to mitel phones.

So at the moment voice gateway router is having cisco unity express installed in it.

My question is that if i shut down service engine interface then servcie engine will be properly disable and would not talk to fast ethernet 0/1.

the reason behind i just want to shut down this interface is just because of rollover if mitel does not work properly and shutting down the interface on service engine interface will wont loos any configuration. please explain.

interface Service-Engine0/0

ip unnumbered FastEthernet0/1

service-module ip address 172.22.37.35 255.255.255.224

service-module ip default-gateway 172.22.37.34   

and i would like to assign new ip address for f 0/1 for mitel network.

interface FastEthernet0/1

description VLAN2$ES_LAN$

ip address 172.22.37.34 255.255.255.224

duplex auto

speed auto 

and can any one explain me why isdn incoming-voice voice has been confiured under channel. do i need to leave as it is for mitel also.

interface Serial0/0/0:15

description E1 to MPLS

no ip address

isdn switch-type primary-net5

isdn incoming-voice voice

no cdp enable  

thanks

Saurabh

1 REPLY
Hall of Fame Super Silver

Migration from Cisco unity to Mitel

Sure that will work.

Chris

372
Views
0
Helpful
1
Replies
CreatePlease to create content