I have several Unified Communications VMs that I deployed using the provided Cisco OVA templates. I'm told by our SAN administrator that they need to be aligned to work well on our NetApp SAN. This is in a FlexPod environment so I'm thinking we can't be first to run into this. Are there any recommendations on how best to accomplish this or can we do a "mbrscan" and "mbralign" on these VMs?
No, that's not the bug. I'm seeing this only from the storage side (NetApp). It's common for any disks that don't line up with 4k block values. Also, this isn't the 60GB OVA they mentioned. It predates that as I'm running 8.6(2) version of the UC apps.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...