We have MCS 7845 running CCM 6.1.3 in cluster mode. We have enabled MLA and we want to view the access logs. Referring to previous discussions on this forum, I have enabled trace for admin services but still in the RTMT I do not see the option of access log. Anything else required to be done.
CUCM 5.x onwards, MLA is enabled by default and you cannot disable it.
For logs, you need to look for the a combination of traces to find out the which user logged in and what webpages were visited.
You want to look at security logs to find the date, time and userid that accessed the system. You need to look at the Cisco CCMAdmin Web Service to look at what pages were accessed in the CCMAdmin area, Cisco CCMService Web server to look at what pages were accessed in the Serviceablity are.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...