Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Mobile 8 and VPN

Hello All,

I have run up the Mobile 8 client and connect via IPSEC VPN, the first time I kick off the mobile 8 client it connects just fine and I can send and receive calls.

If I then close mobile 8 and open it again, it fails to connect.

Any ideas ?

Error log follows:

-- 2010-06-03 10:01:18.868 INFO [8a1000]- [TCSoftphoneWrapper registerSoftphone:] - sending CallManager "REGISTER" and waiting for "200 OK"
-- 2010-06-03 10:01:19.117 DEBUG [8d0800]- [TCSoftphoneCallBacks - ui_update_registration_state_all_lines]: registered=0
-- 2010-06-03 10:01:19.118 DEBUG [8d0800]- [TCSoftphoneCallbacks postNotification:] - posting kTCUpdateRegistrationAllLinesNotification
-- 2010-06-03 10:01:19.118 DEBUG - -[TinCanController updateRegistrationAllLines:]
-- 2010-06-03 10:01:19.119 INFO [8d0800]- [TCSoftphoneCallBacks - ui_sip_config_done]:
-- 2010-06-03 10:01:19.120 DEBUG [8d0800]- [TCSoftphoneCallbacks postNotification:] - posting kTCSipConfigDoneNotification
-- 2010-06-03 10:01:19.121 DEBUG - -[TinCanController sipConfigDone:]
-- 2010-06-03 10:01:19.123 DEBUG [8d0800]- TCSoftphoneCallBacks - platform_get_phrase_text: index=1058
-- 2010-06-03 10:01:19.124 INFO [8d0800]- [TCSoftphoneCallBacks - ui_set_ccm_conn_status]: status 0
-- 2010-06-03 10:01:19.125 DEBUG [8d0800]- [TCSoftphoneCallbacks postNotification:] - posting kTCSetCCMConnStatusNotification
-- 2010-06-03 10:01:19.126 DEBUG - -[TinCanController setCCMConnStatus:]
-- 2010-06-03 10:01:19.126 INFO - [TinCanController setCCMConnStatus:] status = 0
-- 2010-06-03 10:01:19.127 INFO - [TinCanController setCCMConnStatus:] ccmAddr = 172.20.0.12
-- 2010-06-03 10:01:19.127 INFO - [TinCanController setCCMConnStatus:] Got disconnect for a backup CUCM
-- 2010-06-03 10:01:46.026 INFO - [TinCanController connectionDidFailByTimingOut] An attempt to connect has timed out. Stopping the softphone and posting a connectionDidFailByTimingOut notification.
-- 2010-06-03 10:01:46.027 INFO - [TinCanController stopTinCan:] Stopping the softphone.
-- 2010-06-03 10:01:46.029 DEBUG - [UMCStatusBarMessageCenter removeStatusMessage] Message is not in the list: Connecting..., self.statusMessageList =
(
)
-- 2010-06-03 10:01:46.030 DEBUG - [CSINetworkReachability isReachableWithoutRequiringConnection] - flags = 50003
-- 2010-06-03 10:01:46.031 INFO - [UMCStatusBarMessageCenter updateConnectionStatus] Connection status is now: Disconnected
-- 2010-06-03 10:01:46.032 DEBUG - [UMCStatusBarMessageCenter postStatusMessage] Posting a new status message: Disconnected, self.statusMessageList =

2 REPLIES
Cisco Employee

Re: Mobile 8 and VPN

Please try the latest version of Mobile 8.0. We fixed a problem with timeouts connecting to the backup CUCM and that could be what you are seeing.

-Sean

New Member

Mobile 8 and VPN

I am only also facing this exact same problem recently with Cisco Mobile 8 on iPhone and VPN.

I can only find Cisco Mobile 8.0 inside Apple App Store and not Cisco Mobile 8.1, can someone please tell where can i get Cisco Mobile 8.1 for iPhone from ?

By the way, i can't use Cisco Jabber for iPhone because my company didn't buy the Presence Server and i couldn't get iSip and CounterPath Bria for iPhone and iPad to register successfully to my CUCM too. but can i use Cisco Jabber without deploying a Presence Server ?

I am really at my wits end now and i hope that some one here can point me in the right direction.

741
Views
4
Helpful
2
Replies
CreatePlease login to create content