Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Mobile Connect Caller ID

When an off-net caller (user A) dials in through the PRI to a DID that is programmed for Mobile Connect the CLID on the receiver's phone (user B) appears correctly. This call shows the correct 10-digit CLID of the original caller A.

When an on-net caller (caller C) who has a 4-digit internal extension and is in another location from caller B 4-digit dials to caller B ,the CLID on caller B's cell phone shows up incorrectly.

Here's an example:

Caller A's CLID is 212-555-1212 and dials caller B at 847-222-3333 = caller B's cell phone displays correctly as 212-555-1212.

Caller C is in a different city than caller B so their area codes and prefixes are different. Caller C dials caller B's 4-digit internal extension of 3333. On caller B's mobile phone he sees 847-222-8888 which is caller B's area code and prefix plus caller C's last 4 digits. Instead, caller C's CLID should show up as 321-777-8888.