Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

Mobile Voice Access: Codes for Conferencing and Transfer

Hi, I have setup the MVA feature and could get the calls connected using it, however, the Access Codes of *84 for transfer and *85 for Conference do not seem to function. They do not respond to the digits being entered.

*81 for Hold and *83 for Resume does work.

No clue about conferencing and transfer. Please advise.

Ramesh

6 REPLIES

Re: Mobile Voice Access: Codes for Conferencing and Transfer

I do not think those codes work with whats built into the CUCM server. You need to have Mobile Advantage server to handle this. I could only get hold/resume to work with what is built into CUCM. The Transfer and Conference features I think need the Smartphone client, which connects to Mobile Advantage server and it then handles the key codes, etc.

New Member

Re: Mobile Voice Access: Codes for Conferencing and Transfer

Thanks for your update, buddy. So, that means for Conferencing/transfer we need additional Mobility Advantage server?

Re: Mobile Voice Access: Codes for Conferencing and Transfer

You may want to confirm with TAC, but I believe so.

New Member

Re: Mobile Voice Access: Codes for Conferencing and Transfer

Hi Guys,

I am having the same problem as the previous post and was wondering if anyone has managed to get this to work or do i need a dedicated mobility server to use the transfer and conference feature. I have tried searching for documentation to back this up if this is the case so if anyone has an answer this would be great, thanks.

New Member

Re: Mobile Voice Access: Codes for Conferencing and Transfer

Hi,

Ok it does actually work only not using the method described in the documentation. In other words to transfer a call,

* press * 82 (Exclusive Hold)

*select new call from your handset and dial the Enterprise Feature Access number

* Go through the system prompts and authenticate as normal

* Select option 1 to make a new call

* dial the target destination number

*once answered, hit *84 and the call will immediately be transferred.

Re: Mobile Voice Access: Codes for Conferencing and Transfer

Let us know how end user training goes with that! ha......

Good to know it works though.

311
Views
0
Helpful
6
Replies
CreatePlease to create content